وینچ کششی جهت کشیدن و بلند کردن بار از رنج ۳۰۰ کیلو تا ۲۰۰۰ کیلوگرم (کشش)
PRIMO 300 kg - Direct control, single phase
Ref. PRIMO - Economical range
Ref. PRIMO - Limit switch as standard (except three-phase di
PRIMO 300 kg - Direct control, single phase
Electric winch 300 kg. Economical range subject to the same quality standard as the TRBoxter range.
Use:
- Simple lifting and pulling/hauling operations
- Intermediate operating factor
- Boat hauling
- Lifting doors, hatches...
- Freight lifts
- Traps opening
- Theatre applications
- Swimming pool roofs...
Comply with Directive Machines 2006/42/EC and standard NF E N 14492-1.
- Steel rigid structure.
- Mechanical welded steel drum with flanges allowing a secure fastening of the wire rope.
- Mechanical parts machined and protected by cataphoresis.
- Single phase 230 V motor brake with permanent capacitor - 50 Hz lifting type. P = 0.75 kW. Class F. IP 54 Protection.
- Direct control : used only with weather protection.
- Up-down pendant control with emergency stop, cable 3 m long.
- Reducer in oil bath with helical gears.
- Limit switch as standard, very easy to adjust and extremely reliable, made specially by HUCHEZ.
- Options: rope-press roller and grooved drum.
Applications :
Pulling concrete formwork on a construction site.
Moving of the covers on a water treatment plant.
Technical characteristics PRIMO 300 kg - Direct control, single phase
Capacity 1st layer kg |
360 |
Capacity top layer kg |
300 |
Nb of layers |
3 |
Wire rope cap. 1st layer m |
13 |
Wire rope cap. top layer m |
48 |
Wire rope Ø mm |
5 |
Speed 1st layer m/min |
7.5 |
Speed top layer m/min |
9.1 |
FEM |
1Bm |
Motor kW |
0.75 |
Power |
1Ph-230V |
Weight (without wire rope) kg |
35 |
OPTIONS
Grooved drum
This option facilitates correct winding of the first rope layer. It is essential for a two-way system.
Rope-press roller
It enables the rope to be neatly wound on the the drum. This is the essential complement to the grooved drum used for a single winding layer or if the rope is not constant ly taut (empty winding through traction).
Not advisable if the rope is wound on several layers.
Mandatory with a back and forth system.